ZALMAN ZM-GWB3 Specifications download pdf (Page 11)

English

RESERATOR 2

※

The specifications of any product may change without prior notice to improve performance.

5. 6 Install the VGA Water Block (ZM-GWB3)

1) Refer to the manual included with the ZM-GWB3 for installation instructions.

2) If physical interference occurs while installing the Water Block, then stop the installation.

5. 5 Install the CPU Water Block (ZM-WB4 Gold)

1) Refer to the manual included with the ZM-WB4 Gold for installation instructions.

2) If physical interference occurs while installing the Water Block, then stop the installation.

5. 7 Connect the CPU Water Block and

the VGA Water Block

Connect the two Water Blocks with the PVC

Tube as shown in the diagram. Must install

the Tube Clamp

5. 8 Connect the VGA Water Blcok with

Reserator’s Base IN

1) Connect one end of the PVC Tube to the VGA Water Block Fitting and fasten with a

Tube Clamp as shown in the diagram. .

2) Pull out the PVC Tube through the I/O Bracket hole on the computer case.

3) Connect the Quick Coupling Insert that has been disconnected from the Degassing

Tube to the other end of the PVC tube, and fasten it with the use of Tube Clamp.

4) Plug the Quick Coupling Insert into the Reserator’s Base IN fitting.

PVC Tube

CPU Water

Block

VGA Water

Block

5. 9 Connect the CPU Water Block with the Base Out

1) Connect one end of the PVC Tube to the CPU Water Block Fitting and fasten with

Tube Clamp as shown in the diagram.

2) Pull out the PVC Tube through the tube hole of the I/O Bracket.

3) Connect the Quick Coupling Insert to the other end of the PVC Tube, and fasten with

Tube Clamp.

I/O Bracket

Base IN Quick Coupling Body

Quick Coupling Insert

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

ZALMAN ZM-GWB3 Specifications Page 11