ZALMAN CNPS9700 LED Specifications download pdf (Page 7)

※

The specifications of any product may change without prior notice to improve performance.

10. FAN MATE 2 Installation and Usage

1) FAN MATE 2 Installation Inside a System 2) FAN MATE 2 Installation on the Outside of a System

Connect the two 3-pin connectors of the cable to

the motherboard and to the CNPS9700’s Fan

Connector as shown in the diagram.

Pull the 6-Pin Connector out of the system

through the back and connect it to FAN MATE2,

which should be installed on the case using the

included Double-sided Tape (

⑤

◆ The fan operates in Silent Mode when the speed control knob of FAN MATE 2 is fully turned in the

counter-clockwise direction. The fan operates in Normal Mode when the speed control knob of FAN MATE 2

is fully turned in the clock-wise direction. The fan speed can be controlled according to user preference

by adjusting the speed control knob.

Note) FAN MATE 2 has been specifically designed for the fan of this product.

Zalman Tech Co., Ltd. is not responsible for any damages to the system or CPU resulting from its

use with other types of fans.

11. Notes on Usage

1) Checking CPU Compatibility

Please refer to “Compatible CPUs” on page 2 to confirm that your CPU is compatible with the CNPS9700

before using it.

2) Caution During Booting

The computer system may automatically shut down when booting the computer after the system

monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn

the speed control knob in the clockwise direction before rebooting to disable the ‘CPU Fan Detected’

option in BIOS, or set the CPU fan’s rotational speed to 1300rpm or lower in the system monitoring

program.

Note) Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm.

However, booting can be possible even at low fan rpm if the BIOS settings are updated.

For more information on updating your BIOS, please refer to the website of the motherboard’s

manufacturer. There are motherboards which fail to detect the rpm while operating the cooler in

Silent Mode, but this does not affect computing performance.

3) Overclocking

Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.

Fan Connector

(CNPS9700)

Motherboard

Double - sided Tape

FAN MATE 2

6-Pin Connector

1 2 3 4 5 6 7 8

No comments

ZALMAN CNPS9700 LED Specifications Page 7