※
The specifications of any product may change without prior notice to improve performance.
4
⑤⑤
Power Connection (FAN MATE 2)
◆
Please refer to “FAN-MATE 2 Installation and Usage” on page 6.
1) Intel Socket 775
①①
Clip Installation
Refer to “The Clip Installation Method” on page 3 to correctly install the Clip (S-Type,
⑨
) according to
the orientation of the Retention Guide.
②②
Clip Support Installation
Align the Clip Support for Socket 775 (
⑫
) and the Backplate for Socket 775 (
⑬
) with the mounting holes
on the motherboard, and fasten them together by using the Clip Support Fixing Bolts (
⑪
).
The Lever Slot on the Clip Support for Socket 775 (
⑫
) must be properly oriented on the hinged side
of the socket lever when installing.
※
The Backplate Support on the Backplate for Socket 775 (
⑬
) can be removed if deemed unnecessary.
③③
Thermal Grease Application
Clear off particles or any residue from the contact surface of the CPU and heatsink. Shake the
Thermal Grease (ZM-STG1,
②
) well then apply on the contact surface of the CPU and heatsink base.
※
Note
When installing the CNPS9700 on a motherboard with a horizontally-
oriented Retention Guide, take extra care to not exert excessive force
on the fan. Excessive force may damage the fan.
Clip Support Fixing Bolt, ⑪
Clip Support for Socket 775, ⑫
Motherboard
Backplate for Socket 775, ⑬
Backplate Support
Socket Lever Hinge
Socket Lever
Lever Slot
④④
Cooler Installation
Insert two Bolts (
⑩
) into the holes of the Clip (S-type,
⑨
) and
place the CNPS9700 on the center of the CPU. Slightly fasten
the Bolts (
⑩
) into the holes of the Clip Support for Socket 775
(
⑫
), then fasten the Bolts (
⑩
) in an alternating manner until the
Clip (S-Type,
⑨
) is completely pressed against the Clip Support
for Socket 775.
Bolt, ⑩
Clip(S-Type), ⑨
Comments to this Manuals