ZALMAN 102293 Datasheet download pdf (Page 5)

* The specifications of any product may change without prior notice to improve performance.

4. Apply Thermal Grease

Clean the contact surface of the VGA Chipset

completely. Apply thermal grease on the VGA

Chipset that makes contact with the

base of the FHS assembly.

5. Install the FHS Assembly

Align the FHS assembly’s base on the center

of the VGA Chipset. Screw each Bolt A on each

Nipple A slightly, and tighten each Bolt A a few turns

at a time, alternating between each bolt, until the

clip is completely attached to each Nipple A.

Notes) Make sure that the heatsink's base

and the VGA Chipset are completely

in contact with each other.

RAM

Heatsink

Nipple A

VGA Chipset

Thermal

Grease

Bolt A

FHS

Assembly

Clip

Nipple A

VGA Chipset

3. Attach the VGA RAM Heatsinks

Remove the film from the thermal tapes on the

bottom of the RAM Heatsinks and attach the

heatsinks on the VGA RAM.

Note 1) If thermal grease or other residue remains

on the RAM, the thermal tapes will not

stick. Clean the surface of the RAM with

acetone or alcohol before attaching.

Note 2) The bonding strength of the thermal tapes

reaches 90% after 24 hours of curing.

Do not put excessive force on the RAM

heatsinks during this period.

Note 3)

Thermal tapes lose adhesiveness after it has

been used for attachment once and

cannot be reused. Purchase thermal

tapes separately should you try again.

RAM

Heatsink

VGA RAM

Thermal

Tape

Film

Nipple A

VGA Chipset

1 2 3 4 5 6 7

Comments to this Manuals

No comments

ZALMAN 102293 Datasheet Page 5

Comments to this Manuals

Related products and manuals for Computer cooling components ZALMAN 102293